AirFit™ P10 - Pillow Mask
AirFitTM P10 is a minimalist nasal pillows mask designed for people who seek simplicity in their CPAP equipment. It offers:
- A discreet design
- A reliable seal1
- A quiet woven-mesh vent that limits mask noise2
- An easy fit1, thanks to adjustable elasticated headgear
All 3 sizes of pillows cushions (S, M & L) are supplied with this cpap minimalist mask.
Products available on this Store are intended for sale in the United Kingdom only.
AirFitTM P10 is a discreet nasal pillows mask that’s easy to fit and to wear1. The nasal pillows offer a reliable seal1 while the elasticated headgear is adjustable. It has a woven-mesh vent to limit mask noise2.
- Discreet and unobtrusive: the minimalist design offers you a wide field of vision as you get ready for bed, helping you to read, watch television or interact as naturally as possible. AirFit P10 can be a good option if you feel claustrophobic.
- Stability: the nasal pillows cushion offers a reliable seal and a feeling of stability during the night.
- Whisper-quiet: the woven-mesh vent makes the mask as quiet as a whisper at just 21 dBA2, limiting disturbance for you and your bed partner.
- Simple: AirFit P10 is designed to be easy to put on and take off. In fact, it won a coveted RedDot 2014 Award for its user-friendly design and has since been upgraded with adjustable, elasticated headgear.
- For you: available in a standard version and in a For Her version that’s specially designed for women.
- Supplied with 3 sizes of nasal pillows (S, M & L)
If you need an AirFit P10 mask that’s compatible with AirMini, please buy the AirFit P10 for AirMini version.
Ask your doctor about using the ResMed AirFit P10 to treat your sleep apnoea. If you think you might have sleep apnoea but haven't been diagnosed, discuss your concerns with your doctor.
Please refer to the user guide for relevant information related to any warnings and precautions to be considered before and during use of the product.
References:
1. ResMed external 7-night clinical study of 21 ResMed patients, conducted between 09/05/2013 - 04/06/2013. Data on file; ID A2965853.
2. Sound power level of 21 dBA – refer to AirFit P10 user guide.
Technical details
| Manufacturer | ResMed |
| Type | Pillow mask |
| Size | Standard, Headgear STD |
| Not made from latex | Yes |
| Pressure | 4-20cm H2O |
| Included in Package | ResMed AirFit P10 setup pack (incl. frame with short tube, headgear, 3 cushions (Small, Medium and Large) and AirFit P10 user guide (consult user guide for available languages). |
| Warranty | 90 days |
| Material | Silicone, plastic, nylon/elastane |
| AirMini compatible | No |
| Contains magnets | No |
Documents
Access user guides and device compatibility information for your product.
User guide | Mask/Device compatibility list
Please visit Product Support for further information on use, servicing and maintenance of your ResMed device or accessory.
Please see below for expert tips on keeping your AirFit P10 equipment in good condition.
These videos show a version of AirFit P10 that may differ from the version you use.
How do I fit my mask?
- 1. Hold the mask close to your nose and put the pillows in your nose. Choose the right size of pillows to fit your nostrils.
- 2. Pull the headgear over your head by holding the bottom band and stretching it around the back of your head. The top band should sit comfortably on top of your head.
- 3. Adjust the headgear by pulling the adjustable strap through the buckle. Move the mask away from your face then place it back on your face to get a comfortable fit.
- 4. Connect the end of the mask tube into the air tubing of the device.
How do I clean my mask?
- 1. Disassemble the mask into its components as per the disassembly instructions in the user guide.
- 2. Every day after each use, hand-wash the pillows, frame and tubing by rubbing them in warm water using mild soap. Clean the vent with a soft-bristled brush.
- 3. Once a week, hand-wash the headgear in warm water using mild soap.
- 4. Rinse each of the components thoroughly under running tap water.
- 5. Dry the vent with a clean towel to remove excess water.
- 6. Leave each of the components to air dry away from direct sunlight.
- 7. When all components including the vent are dry, reassemble according to the reassembly instructions in the user guide.
- P10 nasal pillows cushions in sizes Small, Medium and Large
- Adjustable headgear with single side-clip
- User guide
- Your therapy doesn’t seem to be as effective as it was
- Your OSA symptoms seem to be returning
- You find yourself tightening the straps on your headgear very frequently or have them tighter than you usually would
- Your mask feels stiffer, looser or less form-fitting than it was when you first used it
- The mask cushion seems slippery or has an unpleasant odour, even after it’s been cleaned and dried
- You notice clear signs of wear and tear, such as cracks or breaks in the frame
Mask replacement schedules are unique to every patient and product. If you’ve noticed any of the above, get in touch with your healthcare professional to see what options might be available to you.
These instructions are for general information purposes only. For full details, please refer to the user guide or consult your physician or healthcare provider.
If you’re unsure about which size of pillows cushion to choose, please ask your physician or healthcare provider to review the sizing of your mask.
If you’re unsure about which size of pillows cushion to choose, please ask your physician or healthcare provider to review the sizing of your mask.
2. Pull the headgear over your head by holding the bottom band and stretching it around the back of your head. The top band should sit comfortably on top of your head.
3. Adjust the headgear by pulling the adjustable strap through the buckle. Move the mask away from your face then place it back on your face to get a comfortable fit.
4. Connect the end of the mask tube into the air tubing of the device.
Consult the user guide or watch our expert tips for information on fitting your AirFit P10 equipment.
In general, we recommend the following cleaning schedule:
- Every day: hand-wash the pillows, frame and tubing. Clean the vent with a soft-bristled brush.
- Every week: hand-wash the headgear.
Consult the user guide or watch our step-by-step expert tips for information on keeping your AirFit P10 equipment in good condition.
For components which need to be cleaned daily, ResMed also offers ready-to-use mask wipes. They can be useful when you’re on holiday or short on time.
These instructions are for general information purposes only. For full details, please consult the user guide.
References
1. The vent may discolour over time. This is not a safety concern. Refer to AirFit P10 user guide.
Delivery
Most orders are delivered within 3-5 working days, however please allow up to 10 working days.
For full information on Delivery, please click here
Returns
From the time your order is received you can return it within 14 days.
For full information on Returns, please click here
VAT
VAT relief is available on most products in the ResMed online shop.
To understand if you are eligible for VAT relief and how to claim this within your order (as we are unable to refund any VAT paid in error), please click here for further information.
You may also like...
